Posted by admin
As the material for conventional speaker cones, various materials have been used, such as natural wood pulp, synthetic pulp comprised of synthetic fibers or plastic fibers, natural fibers, synthetic fibers, carbon fibers, fiberglass, or plastic film. Speaker cones are manufactured by using the characteristics of these materials. Loudspeaker cones can be manufactured from different materials depending on the driver of the project, the desired frequency response for each driver. Although the cone is technically the form of a cone, a cone is sometimes also referred to as the cone / surround assembly to include the suspension called outer surround. Quality midrange and bass drivers are usually made of paper, paper composites and laminates or plastics such as polypropylene or mineral / fiber filled polypropylene. These materials are very high strength / weight (paper, even higher than that of metals) and tend to be relatively free from major decline during the excursions. This enables the driver to react quickly during the transitions of acoustic music and minimize the distortion of output. If properly designed in terms of mass, stiffness and damping, paper woofer / Midrange cones may overcome many exotic drivers made from fancier more expensive materials
A speaker spider which has a central opening the definition of an inner circle, an outer suburb, and a spring provided at the part located between the inner circle and said outer edge to inner circle said to be moved axially up and down relative to said outer edge when a force is applied to the inner circle and must be maintained at an original position Having said business has released at least a pair of lead wires each having a length greater than a distance between said inner edge and said outer rim speaker the spider, where
each of these lead wires has an inner end portion, an outer portion and an attachment end portion extended between the inner and outer end portions, in which said two attachment portions of said two lead wires are spaced between said extended inner rim to said outer edge of the spider, and said interior speaker end said portion and said outer end of each portion of said lead wires are outwardly extended from said inner circle and said outer circle
Speaker of the spider, respectively, and means for attaching said attachment portions of said lead wires on one side surface of said speaker spider so as to secure said attachment portions of said lead wires be spaced between said extended inner circle and outer circle that said speaker spider and to integrate with said speaker spider to move simultaneously, in which said attachment means includes at least one piece of attachment member, a sheet material, with a length at least equal to the width of said attachment portion of said speaker spider and a width of more a large time interval between said spaced pair of lead wires to be attached to said speaker spider, in which an adhesive layer is applied between said attachment member and said side surface of the speaker spider so as to meet the two lead wires on that side of the surface
He said spider. Company works on paper cones, speaker component, components electronic. The mission is the total electronic paper cones, speaker component, electronic component management in order to assist higher to the customer. Each single-minded politics and society is geared to the customer. We have a long list of satisfied customers and our strong and dedicated sales people are hungry for adding new customers. We are in the wine business confidence, given the commitment and the creation of long-term. We conclude, with fond hope of obtaining a rapid response to ensure our value. The resulting fabric increases cone stiffness and strength while maintaining low weight. Speaker engineers are very passionate in their research to build speakers that reproduce the highest sound quality possible. They are constantly looking for materials that can be used to make a more efficient speaker with a stronger more rigid cone. They are constantly looking for materials that can be used to make a more efficient speaker with a strong stiffer cone. The new cones are matched with an ultra light weight soft dome tweeters in both coaxial and component versions. The great dome tweeter soft, made of high quality laminated polyester, use a finite element method. In the coaxial version, the tweeter is placed in a waveguide chamber to control and direct the sound to the ears of the listener.
Standard speakers use cones made of paper or other materials (many use different fabric, rubber, polymers, metals cone or construction) in combination with a magnet to move the air and produce sound. Metal cones usually only be found on the tweeter, which are small speakers, typically no more than 1 ", or in diameter. The magnets move the cones, the cones and push the air to create sound. Many of the speakers are two-way or three-way. This is refers to the number of speakers of the cabinet and as the input signal is divided between them. A two-way will have at least two speakers in the cabinet, with crossover circuit to divide the incoming signal so that a member who handles the increase in the frequency of sound, while the other handles the low-frequency loudspeaker. A three-way speaker is similar, but divides the input low frequency, mid frequency band and high frequency These allow the designer to design the speakers and to provide local maximum benefits in each region
